Creating Your Own Startup Screen - Epson PowerLite 1730W User Manual

note
Once you capture an image,
it automatically replaces the
Epson startup screen.
Although you can change the
startup screen, you cannot
restore the original one.
Fine-Tuning the Projector
60
If you enter an incorrect password 30 times in succession, the
projector remains locked and you must contact Epson to unlock it.
If you have forgotten the password, contact Epson with the request
code number that appears in the Password Protect Release screen for
assistance. See "Where To Get Help" on page 87.

Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the
projector and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the
A/V Mute
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use from either a computer
or video source, such as a DVD player. Then follow these steps to
capture the image and transfer it to the projector:
1. Press the button on the remote control, highlight the
Menu
menu, and press
Extended
2. Highlight
User's Logo
3. When you see a message asking
, select
user's logo?
over the image.
button. The image can be a company
.
Enter
and press .
Enter
Choose this image as the
and press . A selection box displays
Yes Enter