Solving Problems With The Image Or Sound - Epson PowerLite 1730W User Manual

Solving Problems
80
Solving Problems with the Image
or Sound
No image appears on the screen.
Check that the P
■
Power
The projector may be in standby or sleep mode. If the P
■
light is orange, press the P
on.
■ If the power was switched off and then on again, the projector
may be cooling down. Wait until the P
flashing and remains orange; then press the P
again.
Press the
■
A/V Mute
the picture has not been turned off temporarily.
■ Open the A/V Mute slide, if it is closed.
The attached computer may be in sleep mode or displaying a
■
black screen saver. Try pressing a key on the computer.
If you are projecting from a DVD player or other video source,
■
make sure you turn it on and press its
You've connected a computer and see a blue screen with the
message displayed.
No Signal
Make sure the cables are connected correctly, as described on
■
page 40.
If you've connected a computer and one or more video sources,
■
you may need to press the
projector or one of the source buttons on the remote control to
select the correct source. Allow a few seconds for the projector to
sync up after pressing the button.
light is green, not flashing.
button to turn the projector
Power
Power
button on the remote control to make sure
Play
Source Search
Power
light stops
button
Power
button.
button on the