Choose A Location - Epson MovieMate 25 Quick Setup Manual

2
Choose a location
You can use your MovieMate just about anywhere—in the living room, bedroom,
or even outside. You can use it with the subwoofer and screen, or simply project
on a wall and use the built-in audio system without the subwoofer.
The following pictures show three different setups.

If you want an image that fills the screen, place MovieMate about
6 feet away from it. The following diagram shows the approximate
1 ⁄
2
image size (measured diagonally) at various distances.

MovieMate doesn't have to be directly in front of the screen, but it has to
face straight ahead (at a 90-degree angle to the screen).

If the image is too low, too high, or off to the side, you can use the lens
shift dials to adjust the position. See section 5 on the back of this sheet.

Make sure you have a grounded electrical outlet, power strip, or extension
cord with two sockets available: one for MovieMate and one for the
subwoofer.

For the best sound, make sure the subwoofer faces toward you and away
from the screen.