Adjust The Image - Epson MovieMate 25 Quick Setup Manual

4
Start your movie
1
Press the
2
Insert the DVD and close the tray. If the movie doesn't start
automatically, press the
Image on/off button.
3
Adjust the volume if necessary.
5
Adjust the image
1
If the image is too low, too high, or off to the side, use the lens
shift dials to adjust its position.
Up/down lens shift dial
If the picture looks like this
facing straight ahead. Make sure you position MovieMate at a
90-degree angle to the screen. You can then use the left/right lens
shift dial to center the image.
2
Use the zoom ring to adjust the size of the image.
button to open the DVD tray.
Power button or the
or this , MovieMate is not
Left/right lens shift dial