Job Navi. Func. Image Capture Guide List; Role Of Guide List; Creating A Guide List - Ricoh RDC-i500 Operation Manual

JOB Navi. Func. Image Capture Guide List

First of all, it is necessary to explain what a JOB Navi. Image Capture Guide
List is.

Role of Guide List

The JOB Navi. Func. Image Capture Guide List (hereafter referred to as Guide
List) function enables you to record images while checking the Guide List (a list
of images to be recorded) prepared in advance to ensure no images are
forgotten.
For example, imagine that you have been given the job of "Going to a motor
show and taking photos of several cars". You have to take 4 photos of each
car: diagonally, and from the front, rear and side.
When taking photos normally at such times, it often happens that there are slips
of memory or forgetfulness, such as "Did I take this car from the side?" or "Have
I already taken this car from the back?" The Guide List is useful for solving such
problems.
In the case of these examples, before leaving for the motor show, prepare the
following list.
List Name : Motor Show
Image Title : Diagonally
By this means, you only need to proceed with recording according to the Guide
List displayed on the LCD monitor at the motor show. This prevents forgetting
to take important pictures.

Creating a Guide List

There are two ways of creating a Guide List which are explained below in order.
• The camera can only change the order of the image in the Guide List
Note
created by connecting with a PC.
102
Front
Rear
Side