Changing Power-Save Mode Settings (Power-Save) - Ricoh Caplio R1 User Manual

Changing Power-Save Mode Settings
(POWER-SAVE)
The display on the LCD Monitor will turn off.
Press the M or ADJ. button to turn the LCD Monitor display on,
and then press it again to turn the display off. After the end of
setting, the display returns to off.
You cannot turn the LCD Monitor Display on/ off by pressing the T
(Self-timer) or N (Macro) button.
Possible Settings
OFF (Power-Save Mode Inactivated) (Set at purchase)
ON (Activate Power-Save Mode)
To change the Power-Save Mode, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.95.
2.
Press the " " " " button to select
[POWER SAVE] and press the O
or $ $ $ $ button.
3.
Press the !"
the desired setting.
4.
Press the O
5.
When you selected [ON], a message appears for
confirmation. Press the #$
then press the O
6.
Press the M
This setting will be used until you change it.
104
!" buttons to select !" !"
O or # # # # button.
O O
#$ buttons to select [YES], and
#$ #$
O button.
O O
M button. M M
O O O