Changing Auto Power-Off Settings (Auto Power Off) - Ricoh Caplio R1 User Manual

Changing Auto Power-Off Settings
(AUTO POWER OFF)
If you do not operate the camera for the set period of time, it will shut
off automatically (Auto Power-off) to conserve battery power.
At the time of purchase, Auto Power-Off is set to one minute, but you
can change this setting.
Possible Settings
OFF (The Auto Power-Off function does not work)
1 Minute (Default)
5 Minutes
30 Minutes
To change the Auto Power-Off setting, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.95.
2.
Press the " " " " button to select
[AUTO POWER OFF] and press
the O O or $ $ $ $ button.
O O
3.
Press the !"
the desired setting.
4.
Press the O
5.
If you pressed the # # # # button in
step 4, press the M
This setting will be used until you change it.
Note
• To continue on using the camera after auto power-off, slide the power switch to close the
lens cover once (power-off) and slide it again to open (power-on). When the Playback
button is pressed, the lens cover does not open but the camera is turned on for use in
Playback Mode.
• The Auto Power-off function does not work when the camera is connected to a computer.
• When shooting with Interval Shooting, settings made here are not valid and Auto Power-Off
does not work.
102
!" buttons to select !" !"
O or # # # # button.
O O
M button.
M M