Changing Sensitivities (Iso Setting) - Ricoh Caplio R1 User Manual

Changing Sensitivities (ISO SETTING)

The ISO sensitivity indicates how sensitive to light the film is. A
greater value means higher sensitivity. High sensitivity is suitable for
shooting an object in a dark place or moving fast and suppresses
blurring. However, the images become rough.
For higher or lower sensitivity, you can select from the following six
levels:
AUTO, ISO64, ISO100, ISO200, ISO400, ISO800
A digital camera can automatically vary the sensitivity according to
the distance, brightness, zoom, and macro (AUTO). Usually use
your camera in the AUTO mode.
To change the setting, use either the Shooting Setting menu or the ADJ. button.
This section explains easy ways with the ADJ. button.
When using the Shooting Setting menu, see "Using the Shooting Setting Menu" ( P.51).
1.
Turn the Mode Selector to 5
2.
Press the ADJ. Button three times.
The ISO Sensitivity menu appears.
3.
Press the !" !" buttons to select an !" !"
ISO setting.
You can also press the shutter button in
this state.
4.
Press the O O O button. O
The ISO Sensitivity settings are completed
and the setting value appears in the right-
hand portion of the screen.
This setting will be used for shooting until
you change it.
Note
In Wide-angle Zoom mode, when the ISO Sensitivity is set to Auto, the sensitivity is
equivalent to ISO160 with flash or ISO100 without flash.
5 .
5 5
55