Changing Auto Power-Off Settings (Auto Power Off) - Ricoh Caplio G3S Operation Manual

Changing Auto Power-Off Settings (AUTO POWER OFF)

If you do not operate the camera for the set period of time, it will shut off automatically (Auto Power-
off) to conserve battery power.
At the time of purchase, Auto Power-Off is set to one minute, but you can change this setting.
Possible Settings
OFF (The Auto Power-Off function does not work)
1 Minute (Default)
5 Minutes
30 Minutes
To change the Auto Power-Off setting, follow the
steps below.
Turn the Mode Dial to 1 (Setup Mode).
The Setup Screen appears.
• When Auto Power-Off turns off the camera, just press the power button again to turn it on and resume use.
• The Auto Power-off function does not work when connected to a computer.
• When shooting with Interval Shooting, settings made here are not valid and Auto Power-Off does not work.
Chapter 1 / Section 6 Changing Camera Settings
Press the " button to select [AUTO POWER
OFF].
Press the #$ buttons to select the desired
setting.
This setting will be used until you change it.
109