Installing The Caplio Software On Your Computer - Ricoh Caplio 500G wide User Manual

Installing the Caplio Software on Your
Computer
Install the Caplio software on your computer before connecting the
camera.
Caution -----------------------------------------------------------------------------------------
• If you happened to connect your camera to the computer (resulting in the [Add New
Hardware Wizard] screen appearing on your computer screen), simply click [Cancel],
and after disconnecting your camera, install the software on your computer.
• If a message is displayed during installation to uninstall the old Caplio software before
installing the new one, uninstall the old Caplio software once and install the new one
again by following the message instructions. Even with the new Caplio software,
however, the image downloading and other functions of the old model can still be used
as before. (For how to uninstall the software, see P.149.)
• For Windows XP or Windows 2000, administrator privileges are required to install the
software.
Here is an example of the Windows XP screen.
1
Start your computer and insert
the Caplio Software CD-ROM in
the CD-ROM drive.
• The installer screen appears
automatically.
2
Click [Installing the software].
• After a while, the [Choose Setup
Language] screen appears.
3
Confirm the language, and then click [OK].
• The [Welcome to the InstallShield Wizard for Caplio Software] screen
appears.
4
Click [Next].
• The [Choose Destination Location]
screen appears.
7
143