Loading The Battery And Sd Memory Card - Ricoh Caplio 500G wide User Manual

Loading the Battery and SD Memory Card

The rechargeable battery (DB-43) can be used to power this
camera. This battery is convenient because the battery power
lasts long and it can be used over and over again by recharging.
If you have already used this camera, make sure it is turned off
before loading the battery and card.
1
Turn the battery/card
cover knob toward the M
mark to open the cover.
2
Make sure the SD memory
card is facing the right way
and then push the card all
the way in until it clicks.
• The rechargeable battery may
be inserted first.
3
Insert the rechargeable
battery.
• Lift the latch with the battery and
insert the battery all the way into
the battery compartment.
• When the rechargeable battery
is loaded in place, it is locked
with the latch.
Loading AA alkaline batteries
(available in stores)
• Insert the batteries in the
direction shown.
• Insert the top battery while
using the battery to lift the latch.
25