Connecting The Camera To Your Computer - Ricoh Caplio 500G wide User Manual

Connecting the Camera to Your
Computer
After installing the software on your computer, connect your camera
to the computer.
The following explanation is provided assuming that [ORIGINAL]
(default) is selected at [USB CONNECTION] of the camera's
SETUP menu. (GP.132) If [MASS STR] is selected, change it to
[ORIGINAL]. You can also download images in mass storage mode
(GP.160).
1
Make sure the camera power is off.
2
Connect the USB cable to the
USB port of your computer.
3
Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on.
7
Caution -----------------------------------------------------------------------------------------
Before opening or closing the battery/card cover or terminal cover, be sure to remove any
water, sand or mud adhering to the camera, and avoid opening and closing the cover in
places where such contaminants may get inside the camera.
158