Using The Self-Timer - Ricoh Caplio 500G wide User Manual

t Using the Self-Timer
You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.
1
Turn the mode dial to 5/K.
2
Press the t (Self-timer)
button.
• The Self-timer symbol appears on
the screen.
• The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the camera
will shoot after 10 seconds.
• Each press of the t (Self-timer) button changes the self-timer
setting in the following order: 10 sec, 2 sec, and Self-timer Off.
3
Press the shutter release button.
• The focus is locked, and the AF auxiliary light blinks when the
self-timer starts.
• Once the picture is taken, the self-timer turns off.
Note ---------------------------------------------------------------------------------------------------
When the self-timer is set to 2 seconds, the AF auxiliary light does not blink.
45