Regency Horizon HZ42-NG Owners & Installation Manual page 44

Inner Slide
7) Attach bracket and slide (slide facing in) to the bottom
faceplate panel with 4 screws.
Note: Screw locations and brackets differ between HZ42 and
HZ42 ST units. Identify left and right brackets before
installation.
Left
HZ42 ST brackets
See-thru unit screw locations
HZ42 ST
Left
HZ42 brackets
HZ42 Regency Horizon TM Gas Fireplace
8) Repeat steps 3 -5 to install opposite bracket and slide.
9) With brackets and inner slides attached to the lower faceplate
panel - guide the lower faceplate panel into the outer slides located
in the bottom part of the unit. See inset.
Push in until fl ush with upper faceplate.
Bracket
Right
To adjust the space between the upper faceplate and the lower
faceplate panel - see step 2.
10) Final installation of faceplate on HZ42 unit
Right
Note: Two faceplates need to be installed on the HZ42 ST unit.
INSTALLATION
Single side unit screw locations
HZ42
43