Controls & Features; Maintenance; Cleaning; Metal Filters - Zephyr SAVONA ZSA-E30AS Use, Care And Installation Manual

CONTROLS & FEATURES
MAINTENANCE
CLEANING CONTROLS & FEATURES
Blower On/Off • Lights OVOff
\ /
@
0 I II III 0/I
0 Blower Speed Selection
Blower On/Of
The blower will be switched on or off by pressing:
Blower Speed Selection
Select one d three speed levels by pressing:
@@@
I II III
• Lights On/Off
Switch lights on and off by pressing:
0/I
Surface Maintenance:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive
detergent (e.c_cornet powder scrub, EZ-Offoven cleaner), or steel wool/scoring pads which will
scratch and damage surface.
For heavier soil use liquid degreaser such as 'Formula 409' or 'Fantastic' brand cleaner.
After cleaning, you may use non abrasive stainless steel polish! cleaners such as 3M or
ZER to polish and buff out the stainless luster and grain. Always scrub lightly, with
clean cotton cloth, and with the grair_
Metal Filters
The Metal Filters fitted by the factory are
intended to filter out residue and grease
from cooking. It need not be replaced on a
regular basis but are required to be kept clean.
Filters should be cleaned after every 30
hours of use.
Remove and clean by hand or in
dishwasher. Spray 'Formula 409' or
equivalent degreasing detergent and leave
to soak if heavily soiled.
C_ filters and re-install before using hood.
Replacing Metal Filters
Should filters wear out due to age and
prolonged use, replace with following part
number:
Hood Model: Pa_No. Film_inpk_
ZSA-M90AS ZOF-C022 2
ZSV-M90AS ZOF-C022 2
ZSA-E30AS ZOF-C022 2
ZSV-E30AS ZOF-C022 2
Also replace damaged filter that has
punctured or broken mesh, bent or broken frame.
ModeI:ZSA/ZSV Page6 ModeI:ZSA/ZSV Page7