Scan for Storage and Confirm Available Space
Create Volume Groups
To access LUNs on supported devices within the SAN:
1.
Select Storage Array Summary.
2.
Select Actions > Scan for New Storage.
The LUNs assigned to the HP NAS 8000 within the SAN will be added to the Storage Array
Summary table.
Figure 11
Scan for New Storage
3.
Compare the figure in the
worksheet.
4.
Adjust the planned space allocations for Volume Groups, Snapshots and File Volumes on
the storage planning worksheet as necessary.
1.
Select Volume Groups.
2.
Select Actions > Create New Volume Group.
3.
Enter a Volume Group Name and assign space from available LUNs.
Figure 12
Volume Group Settings
Repeat steps 2 and 3 to create additional volume groups.
Unallocated column to the available space on your planning
Installation Guide
39