3.
Use the Configuration Wizard to configure the HP NAS 8000. The Wizard leads you
through the configuration of:
—
System settings
—
Network settings
—
Alert settings
4.
Check Activate Cluster
Activate Cluster, then click Finish when prompted to save your settings and exit the
Activate Cluster
Activate Cluster
Wizard. A summary of your settings is displayed in the browser.
You can make changes with the Command View NAS web interface later (see the
Surestore NAS 8000 User's Guide ).
5.
The Command View NAS web interface will restart the web browser. Wait for the browser
window to open and then continue to the next section.
HP
Installation Guide
37