Lamp Indicator - Epson EMP 5600 Owner's Manual

Indicator Status
Blinking in Green
Illuminated in Red
Extinguished

Lamp Indicator

Indicator Status
Blinking in Red
Blinking in Orange
Extinguished
Cause
Warm-up in (Not an error)
progress · Wait for a moment.
· The green lamp will stop blinking and
become illuminated once the warm-up
procedure has been completed.
Internal error Cease operations, remove the Power Plug from
the socket and contact your dealer or nearest
address provided at page 97 and request
repairs.
The power is not The power is not switched on.
switched on
· Check the power cord connection.
· Check the power supply to the socket.
Cause
Lamp error · Replace with a new lamp (ELPLP12).
· If the lamp is broken, take care to avoid injury
and contact your nearest address provided at
page 97 Center to request repairs.
· Ensure that the lamp and lamp cover have
been attached firmly after replacing the lamp.
The equipment is fitted with a mechanism
that prevents the lamp from being switched
on if the lamp and lamp cover are not
securely in place.
Time to replace the Replace with a new lamp (ELPLP12).
lamp.
(Not an error)
The power has not been switched on or nor-
mal projection is in progress.
Recovery or Status
Recovery and Status
Troubleshooting - 75
Reference
Page
42
42
Reference
Page
87
87