Epson EMP 5600 Owner's Manual page 48

4
After cooling (check that the operation indicator is illuminated in orange), unplug the
Power Plug from the socket.
Do not remove the Power Plug from the socket when the Operation Indicator is blinking in
orange. Failure to observe this may result in damage to the equipment and will speed up the
period for replacing the lamp.
5
Set the R/C ON OFF switch to [OFF] when using the remote control.
Point
The batteries are being consumed when the [R/C ON OFF] switch on the remote control
unit is set at [ON]. Ensure that the [R/C ON OFF] switch on the remote control unit is set to
[OFF] when not in use.
6
Restore the Front Foot if it has been extended.
Steady the projector by hand, and then lift the Foot Adjust Lever with a finger and gently
lower it into the main Unit.
7
Attach the lens cover.
46 - Ending
Operation Indicator
Power
Computer
A/V mute
Resize
Illuminated in orange
Caution
Power
Freeze
A/V Mute
R/C ON
E-Zoom
OFF
3
Enter
Foot adjust lever