Kenmore 625.385010 Owner's Manual page 10

Supply water pressure limits ......................................... 30-125 psi (207-862 kPa)
Supply water temperature limits ........................................... 40-100 °F (5-40 °C)
Inlet - Outlet ..................................................... 3/8" O.D. tubing, included
This system conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substantiated
by test data.
Installations In The Commonwealth Of Massachusetts: The Commonwealth of Massachusetts requires instal-
lation be performed by a licensed plumber. Plumbing code 248--CMR of the Commonwealth of Massachusetts
must be followed in these cases.
Cause: Tubing not pushed in all the way. Correction: Push Tubing all the way into fittings. See Page 8.
Cause: Tubing not cut square. Correction: Cut tubing square. See Page 8.
Remove tube from connection. Remove nicked portion
Cause: Tubing nicked. Correction: by cutting tube to shorter length. Reinsert in connection
See Page 8.
Remove tube from connection. Remove problem area
Cause: Outer tubing surface not smooth. Correction: by cutting tube to shorter length. Reinsert in connection
See Page 8.
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
10