Expansion Slots; Mini Pcie Slots; Pcie X1 Slot; Jumper Settings - Zotac NM10-ITX WiFi User Manual

Expansion slots

The motherboard contains three expansion slots, two Mini PCIE slots and one PCIE x1 slot.
M_PCIE2
PCIEX1
Mini PCIE Slots-MINI_PCIE1/2
There are two Mini PCIE slots, reserved for the WiFi Module.
PCIE x1 Slot-PCIEX1
There is one PCI Express x1 slot that is designed to accommodate less bandwidth intensive
cards, such as a modem or LAN card. The PCI Express x1 slot provides 500 MB/s bandwidth.

Jumper Settings

This chapter explains how to configure the motherboard's hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section
whenever in doubt.
CMOS Clear Jumper-JP1
JP1
1-2* Normal*
1
1 2-3 CMOS Clear
Close Open
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
Notice:
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the
frequency multiplier setting in CMOS setup is changed.
2 52
1 51
Selection
* = Default setting.
Hardware Installation
M_PCIE1
52 51
2 1
17