Intel
NM10-ITX series Motherboard
®
Step 2. Secure the bracket to the motherboard with screws according to the picture below.
Step 3. Connect the WiFi wire to the MINI PCIE card as the following picture shows.
Bracket
Step 4. Remove the red cap from the WiFi antenna connector.
Install the WiFi antenna to the WiFi antenna connector, and make sure the screw is
rotated in clockwise direction.
5
10
6
15
11
Note: 1. Users please note that the appearance of your WiFi antenna modules may
not be exactly the same as those shown in this manual.
2. Users can bend or rotate the WiFi antennas to the best receiving direction
according to the picture below.
8
Bracket
5
6
10
15
11
Screws
WiFi wire
5
6
10
15
11
MINI PCIE card