Configuring The Bios; Enter Bios Setup; Main Menu - Zotac NM10-ITX WiFi User Manual

Intel NM10-ITX series Motherboard
®

Configuring the BIOS

This section discusses how to change the system settings through the BIOS Setup
menus. Detailed descriptions of the BIOS parameters are also provided.

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software. Correctly
setting the BIOS parameters is critical to maintain optimal system performance.
Use the following procedure to verify/change BIOS settings.
1. Power on the computer.,
2. Press the Del key when the following message briefly displays at the bottom of
the screen during the Power On Self Test (POST).
Pressing Del takes you to the BIOS Setup Utility.
Note: 1. We reserve the right to update the BIOS version presented in the manual. The
BIOS pictures shown in this section are for reference only.
2. It is strongly recommended that you do not change the default BIOS settings.
Changing some settings could damage your system.

Main Menu

This menu gives you an overview of the general system specifications. The BIOS
automatically detects the items in this menu.
q AMI BIOS
Displays the auto-detected BIOS information
q Processor
Display the auto-detected CPU specification
q System Memory
Displays the auto-detected system memory
q System time
Allows you to set the system time
18
Note: Users please
that the data in gray is non-
changeable, and the others
are for selection.
note