Connecting Cables And Setting Switches - Zotac nForce 610i-ITX User Manual

Connecting Cables and Setting Switches

This section takes you through all the connections and switch settings necessary on
the motherboard. This will include:
q Power Connections
v 20-pin ATX power (PW1)
v 4-pin ATX 12V power (PW2)
q Internal Headers
v SPDIF Out Header (Optional)
v SPK Connector
v Front panel Header
v USB Headers
v Serial Port Connector-COM
v Audio
q Serial ATA II
q Chassis Fans
q Expansion slots
q Jumper settings
See Figure 1 to locate the connectors and jumpers referenced in the following
procedure.
Hardware Installation
11