Speaker Configuration
Step 1: Plug in the device in any available jack.
Step 2: Dialogue "connected device" will pop up for your selection. Please select the
device you are trying to plug in.
If the device is being plugged into the correct jack,you will be able to find the
*
icon beside the jack changed to the one that is same as your device.
If not correct,Realtek HD Audio Manager will guide you to plug the device into
*
the correct jack.
Connector Settings
Click to access connector settings
Mute rear panel when front headphone plugged in
√
Once this option is checked,when front headphone is plugged,the music that is
playing from the back panel,will be stopped.
Disable front panel jack detection (option)
√
Did not find any function on front panel jacks?
Please check if front jacks on your system are so-called AC'97 jacks. If so,
please check this item to disable front panel jack detection.
Enable auto popup dialogue, when device has been plugged in.
√
Once this item checked,the dialog "Connected device" would automatically pop up
when device plugged in.
Installing Drivers and Software
35