Discard Changes And Exit; Load Optimal Defaults; Load Failsafe Defaults - Zotac nForce 610i-ITX User Manual

Configuring the BIOS
Save Change and Exit
Once you are finished making your selections, choose this option from the Exit menu
to ensure the values you selected are saved to the CMOS RAM. An onboard backup
battery sustains the CMOS RAM so it stays on even when the PC is turned off. When
you select this option, a confirmation window appears. Select OK to save change and
exit.

Discard Changes and Exit

Select this option only if you do not want to save the changes that you made to the
setup program. If you made changes to fields other than system date, system time,
and password, the BIOS asks for a confirmation before exiting.
Discard Changes
This option allows you to discard the selections you made and restore the previously
saved values. After selecting this option, a confirmation appears. Select Ok to discard
any change and load the previously saved values.

Load Optimal Defaults

This option allows you to load the default values for each of the parameters on the
setup menus. When you select this option, a confirmation window appears. Select Ok
to load default values. Select Exit and Save Change or make other changes before
saving the values to the non-volatile RAM.

Load Failsafe Defaults

This option has been set by the manufacturer and represents settings which provide
the minimum requirements for your sys to operate.
27