Installing The Cpu Fan; Installing Memory Dimms - Zotac nForce 610i-ITX User Manual

Installing the CPU Fan

There are many different fan types that can be used with this motherboard. Follow the
instruction that came with your fan assembly. Be sure that the fan orientation is correct
for your chassis type and your fan assembly.

Installing Memory DIMMs

Your new motherboard has two 1.8V 240-pin slots for DDR2 memory. These slots
support 256 Mb, 512 Mb, 1Gb and 2Gb DDR2 technologies. There must be at least
one memory bank populated to ensure normal operation. Use the following the rec-
ommendations for installing memory. (See Figure 1 on page 5 for the location of the
memory slots.)
q One DIMM: Install into slot 1 or 2. You can install the DIMM into any slot,
however, slot 1 is preferred.
q Two DIMMs: Install into both slots 1 and slot 2.
Hardware Installation
DDRII-1
DDRII-2
9