Expansion Slots; Mini Pcie Slot; Pcie X16 Slot; Jumper Settings - Zotac G45-ITX series User Manual

Intel G4X-ITX series Motherboard

Expansion slots

The motherboard contains two expansion slots, one Mini PCIE slot and one PCIE x16 slot.
1
51
MINI_PCIE1
PCIE1
Mini PCIE slot-MINI_PCIE1
There is one Mini PCIE slot, reserved for WiFi Module.
PCIE x16 Slot-PCIE1
There is one PCIE x16 slot reserved for graphics or video cards. The bandwidth of the PCIE x16
slot is up to 8 GB/sec complianting with PCIE 2.0 specification.
Note: The PCIE x16 slot supports PCIE graphics cards, but does not support any PCIE x1
device.

Jumper Settings

This chapter explains how to configure the motherboard's hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this chapter
whenever in doubt.
CMOS Clear Jumper-JP1
JP1
1-2* Normal*
1
2-3 CMOS Clear
1
Close Open
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
Notice:
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the
frequency multiplier setting in CMOS setup is changed.
18
2
52
Selection
* = Default setting.
240 120 240 120
121 121