Table of Contents
Advertisement
B. Installing Windows Vista
1.
Restart your system to boot from the Windows Vista setup disk and perform standard OS
installation steps. When a screen as below appears, select Load Driver.
2.
Specify the location where the driver is saved, such as your floppy disk or USB flash drive.
For users using a SATA optical drive, be sure to copy the driver files from the motherboard
driver disk to a USB flash drive before installing Windows Vista (go to the BootDrv folder
and save the whole iMSM folder to the USB flash drive). Then use Method B to load the
driver.
Method A:
Insert the motherboard driver disk into your system and browse to the following directoy:\
BootDrv\iMSM\32Bit
For Windows Vista 64-bit, browse to the 64Bit folder.
Method B:
Insert the USB flash drive containing the driver files and browse to the 32Bit (for Windows Vista
32-bit) or 64Bit (for Windows Vista 64-bit) folder.
Installing Drivers and Software
49
Hide quick links:
Advertisement
Table of Contents
