Boot Menu - Zotac G45-ITX series User Manual

Intel G4X-ITX series Motherboard
q Palette Snooping
When set to [Enabled], the pallete snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly.
q PCI IDE BusMaster
When set to [Enabled], BIOS use PCI busmastering for reading/writing to IDE
drives.
q OffBoard PCI/ISA IDE Card
Use this option to set the PCI slot number for some PCI IDE Cards holding.
q IRQ3/4/5/7/9/10/11/14/15
These items allow you to set the Interrupt Request.
q DMA Channel 0/1/3/5/6/7
Use these items to set the Direct Memory Access Channel.
q Reserved Memory Size
This item allows you to set the size of memory block to reserve for legacy ISA
devices.

Boot Menu

The Boot menu items allow you to change the system boot options. Press <enter> to
display the configuration options:
Boot settings configuration
The items allow you to configure Boot settings. Press <enter> To display the
configuration options:
q Quick Boot
Enabling this item allows the BIOS to skip some power on self tests while booting
to decrease the time needed to boot the system. When set to [Disabled], BIOS
performs all the POST items.
q Quiet Boot
When set to [Disabled], displays normal POST message. When set to [Enabled],
displays OEM Logo instead of POST messages.
q AddOn ROM Display Mode
Sets the display mode for option ROM.
q Bootup Num-Lock
Allows you to select the power-on state for the NumLock
24
.