Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear the
warning message. Follow these steps:
Replace the Lamp
1. Connect the power cable and turn on the projector.
2. Press the
button on the remote control or projector and
Menu
select the
menu. Then press
Reset
3. Select the
Lamp-Hours Reset
the following:
4. Select
and press
Yes
5. Press
to return to the main menu or the
Esc
the menu system.
. You see the following:
Enter
option and press
.
Enter
. You see
Enter
button to exit
Menu
Maintaining and Transporting the Projector
note
Do not reset the lamp timer if
you have not replaced the
lamp. If you do, the
Lamp
will not accurately
Hours
reflect the number of hours
that the lamp has been used.
Esc button
Enter button
Menu buttton
Menu button
Esc button
Enter button
75