Connecting With A Vga-5Bnc Cable - Epson PowerLite 821p User Manual

VGA-5BNC cable
Setting Up the Projector
18
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 30 for instructions.
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the
button on the projector or the
remote control. See page 32.

Connecting with a VGA-5BNC Cable

If your computer provides video output through BNC connectors,
follow these instructions to connect the projector to your computer
with an optional VGA-5BNC cable. Before you start, make sure your
computer and the projector are turned off.
1. Disconnect the monitor cable from your computer.
2. Connect the cable's VGA connector to the projector's
Computer1/Component Video1
Computer2/Component Video2
connect your computer monitor to the projector for simultaneous
display, use the
Computer1/Component Video1
3. Connect the BNC connectors to your computer's BNC ports.
4. Tighten the screws on the VGA connector.
If you want to view the display simultaneously on your computer
monitor and the projector screen, see "Connecting an External
Monitor" on page 20.
Source Search
or button on the
Comp1 Comp2
or the
port. If you are going to
port.