Select a source
Moves through all the
input sources in sequence
Using the Remote Control
44
Controlling the Picture and Sound
You can use the remote control to select your source, temporarily turn
off the picture and sound, freeze the action, or zoom in on the picture.
Make sure you have set up your projector and connected any
equipment as described in Chapter 1.
Switching Between Picture Sources
If you've connected your projector to more than one computer and/or
video source, you can use the buttons on the remote control to switch
between the different sources.
Press the
button to select the computer or video source
Comp1
connected to the projector's
port.
Press the
Comp 2
connected to the projector's
port.
Press the
S-Video
projector's
S-Video
Press the
button to select a video source connected to the
Video
projector's
port.
Video
Press the
Source Search
of the input sources.
After you select a source, the screen goes dark for a moment before the
image appears. The name of the selected source (such as
or
) appears briefly on the screen.
S-Video
Computer1/Component Video1
button to select the computer or video source
Computer2/Component Video2
button to select a video source connected to the
port.
button to move successively through all
Computer1