Playing Sound Through The Projector - Epson PowerLite 821p User Manual

Playing Sound Through the Projector

Your computer probably has its own sound system; however, it may
not be adequate for your presentation. If you need more volume, you
can connect a computer audio cable to take advantage of the
projector's built-in speaker. You can obtain a computer audio cable
(3.5-mm stereo miniplug cable) from a computer or electronics dealer.
1. Connect one end of the audio cable to the
projector.
2. Connect the other end of the audio cable to your notebook's
headphone jack or
speaker or audio-out port.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 30 for instructions.
Audio1
audio-out jack, or your desktop's
jack on the
note
If you've connected two
computers to the projector,
you can play sound from
both. Connect the audio
cable for the computer
connected to the
Computer 2/Component
Video 2
Audio 2
projector. Connect the other
end of the cable to the second
computer.
When you switch sources,
the projector automatically
plays sound from the new
source.
Setting Up the Projector
connector to the
jack on the
21