Connecting With A Vga-5Bnc Cable - Epson Powerlite 76C User Manual
Sony projector 76c user's guide
Hide thumbs
Also See for Powerlite 76C:
- Manual (15 pages) ,
- Quick setup manual (7 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
VGA-5BNC cable
Setting Up the Projector
20
Connecting with a VGA-5BNC Cable
If your computer provides video output through BNC connectors,
follow these instructions to connect the projector to your computer
with an optional VGA-5BNC cable. Before you start, make sure your
computer and the projector are turned off.
1. Disconnect the monitor cable from your computer.
2. Connect the cable's VGA connector to the projector's
Computer(Component Video)
3. Connect the BNC connectors to your computer's BNC ports.
4. If you want to view the display simultaneously on your computer
monitor and the projector screen, see "Connecting an External
Monitor" on page 22.
5. Tighten the screws on the VGA connector.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the
button on the projector or the
See page 34.
port.
Source Search
button on the remote control.
Comp
Advertisement
Table of Contents
