Description; Know Your Laser Measuring Tool - Craftsman 320.48298 Product Manual

Do not attempt to modify the performance of this laser device in any way,
This may result in a dangerous exposure to laser radiation,
o Do not attempt to repair or disassemble the laser-measuring tool. If unquali-
fied persons attempt to repair this product, serious injury may occur. Any
repair required on this laser product should be performed only by authorized
service personnel.
o Do not operate the tool in combustible areas, such as in the presence of
flammable liquids, gases, or dust°
o Use of other accessories that have been designed for use with other laser
tools could result in serious injury.
o Keep batteries out of reach of children.
o For further information regarding lasers, refer to ANSI-Z136.1, the Standard
for the Safe Use of Lasers, available from the Laser Institute of America (407)
3804 553.
KNOW YOUR LASER MEASURING TOOL (See Fig. 1)
The laser measuring tool is a highly accurate measuring tool for fast, easy operation:
° Measure distances from 1 foot to 150 feet with an accuracy of 4-3/16 inch.
, The laser measuring tool is intended for:
° Measuring distances, lengths, heights, and clearances
o Difficult-to-measure situations: the Pythagorean Theorem mode allows
indirect measurement
° Calculating areas and volumes
, Use in interior and exterior conditions.
° Easy-to-read numbers and the backlit screen are clearly visible indoors and
outdoors.
o Use the integrated bubble vial to level your tool for accurate measurement.
o Use the Recall function to recall the last 10 readings.
° The automatic power-off function turns the tool off after 5 minutes of inactivity
for increased battery life.
48298 Manual Revised_07_O225 Page 4