Craftsman 320.48298 Product Manual page 12

2. Fig. 14
3_
Press the MEASURE key to
turn on the laser beam; the
laser indicator will blink from
bottom to top (Fig. 14).
Position the tool to aim the
laser dot at the target to which
you want to measure.
4. Press the MEASURE key to
display the measured length in
the lower and upper rows of the
screen. The height line in the "
I_" icon will also start to blink
(Fig. 15).
5. Position the tool to aim the
laser at the target.
6o Press the MEASURE key again
to display the height in the up-
per row of the screen; the area
will be displayed at the same
time in the lower (Fig. 16).
7. The width line in the "_" icon
will start to blink (Fig. 16).
8_
.
Press the MEASURE key
again to display the volume in
the lower row of the screen;
the width will be displayed at
the same time in the upper
row (Fig. 17).
Press the MEASURE key to
make a new measurement.
I
i
Fig. 15
I
I
6.759 ft
6.759 ft
Fig. 16
o
I
I
g
2.320 ft
15.681 ft 2
Fig. !7
3.675 ft
57.627 ft
48298 Manual Revised_07*0225 Page 3.2