What To Do When The Lights Flash - Epson PowerLite 8150i User Manual

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status and
let you know when a problem occurs.
If the projector is not working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
does not solve the problem, check the status lights on top of the
projector and try the solutions recommended below.
Light Status
does not come on
green
flashing green
orange
flashing orange
red
flashing orange
flashing red
power light
lamp light
temperature light
Description
Make sure the power cord is connected securely. If you've just
replaced the lamp, make sure its cover is fastened securely.
The projector is operating normally.
The projector is warming up. Wait for the image to appear.
The projector is in sleep mode. You can unplug it to turn it off or press
the Power button to turn it on.
The lamp is cooling down. Don't unplug the projector until the light
stops flashing. If you want to turn the projector back on, wait until the
light stops flashing and press the Power button.
Power is cut off because of an internal problem. Remove the power
cord and contact EPSON for help; see page 72.
The lamp is almost burned out. This is a good time to replace it. See
the Administrator's Manual for instructions.
The lamp is burned out. See the Administrator's Manual for
replacement instructions.
Solving Problems
61