caution
Don't hold the
Help button
?
for more than 5 seconds, or
the projector will enter the
mode for resetting the lamp
timer.
Solving Problems
60
Using On-Screen Help
If you see a
No Signal
get help by pressing the blue
under the cover on the remote control. The following choices are
available:
Help for the image
Tells you what to do if you see a
Help for the sound
Tells you what to do when your audio isn't working
Language selection
Lets you display the help information and projector menus in any
of nine different languages
Follow these steps to get help:
1. Press the blue
? Help
2. Use the
up or
move the
button up or down on the remote control) to
Enter
highlight one of the options. Then press the
select it.
3. Press the
or
Enter
if you need to back up.)
Esc
4. Press the down arrow button on the control panel (or press down
on the
button on the remote control) to display additional
Enter
text.
5. To exit the Help system, press the blue
If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.
message or your audio isn't working, you can
button on top of the projector or
? Help
No Signal
button. You see the help menu.
down arrow buttons on the control panel (or
button again to view the solutions. (Press
? Help
message
or
button to
Enter
button.