Epson PowerLite 8150i User Manual page 45

note
It takes a few seconds for the
projector to sync up after
selecting the source. After
pressing one of the source
buttons, wait a moment for
the image to appear.
Displaying and Adjusting the Image
40
3. To display the image, do one of the following:
On the projector's control panel, press the
button to switch between EasyMP,
EasyMP.net
Computer 1, and Computer 2; or press the
switch between the video sources (composite, component, or
S-video).
Power
Comp/
source
buttons
A/V mute
Resize
On the remote control, press
the ,
Comp1 Comp2/YCbCr
, or
EasyMP.net
button to switch sources.
If you see a blue screen with the
No Signal message, you may have
to press the button again to select
the correct source. If a projected
image fails to appear, see page 63
for help.
Menu
Esc
Help
Video
Keystone
Shift Volume
,
select
Video
computer 1
select
EasyMP
Comp/
button to
Video
select computer 2 or
component video
Esc
Menu Help
Comp1 Comp2/YCbCr
Video
Capture APPs
Auto Resize
P in P Preset
- Volume +
select
RCA video
or S-video