Connecting To A Pc Laptop Computer - Epson EMP-3300 Owner's Manual

Connecting to a PC laptop computer

Before beginning, turn off the projector and computer if they are on. To access
the connectors on the projector, push open the cover located on the right side of
the projector, under the handle.
1. Connect the LCD connector on the Y-cable to the projector's Computer
2. Connect the VGA connector on the Y-cable to the laptop's monitor port.
3. Tighten the screws for all connectors to make sure they are fastened securely.
2
VGA connector
MONITOR connector
8 1 • Installation
IN/OUT port.
When the external graphics port is activated, some laptop computers
automatically turn off their internal display. See your computer manual for
information on using the internal display.
1
LCD connector
Computer
L R
Audio In
Computer In/Out S-Video