Advertisement
Know Your Air Compressor
READ THIS OWNER!S MANUAL AND SAFETY RULES BEEORE OPERATING
YOUR UNIT. Compare She !llustrations with your uni$to familiarize yourself with
tile 10eati0n of various Controls and adjustmentsi
save ihle ma_uai for future
reference
Description
of Operation
Become familiar with these controls
before operating the unit.
Orv'Aute/Off Switch: Turn this switch
ON to provide automatic power to
the pressure switch and OFF to
remove power at the end of each
USe.
Pressure Switch: The pressure
switch automatically
starts the motor
when the air tank pressure drops
below the factory set "cutqn"
pressure, It stops the motor when the
air tank pressure reaches the factory
sat "cut-out"
pressure.
Safety Valve: If the pressure switch
does not shut off the air compressor
at its "cut-out"
pressure setting, the
safety valve will protect against high
pressure by "popping
out" at its
factory set pressure (slightly higher
than the pressure switch "cut-out"
setting}.
Outlet Pressure Gauge:
The outlet
pressure gauge indicates the air
pressure available at the outlet side
of the regulator. This pressure is
controlled by the regulator and is
always less than or equal to the tank
pressure,
Regulator
Tank Pressure Gauge: The tank
pressure gauge indicates the reserve
air pressure in the tank.
Regulater:
Controls the air pressure
shown on the outlet pressure gauge.
Pull the knob out and turn clockwise
to increase pressure and
counterclockwise
to decrease
pressure, When the desired pressure
is reached push knob in to lock in
place.
Universal Quick*Connect
Body:
Ihe universal quick-connect
body
accepts the three most popular styles
of quick-connect
plugs: Industrial,
automotive
(Tru-flate}, and ARC, One
hand push-to-connect
operation
makes connections simple and easy.
Brain Valve: The drain valve is
located at the base of the air tank
and is used to drain condensation
at
the end of each use.
13- ENG
D27304
Advertisement
