Advertisement
Contents
of Carton
Assemble
Wheels
f _ _r Compre.ssor
I
_ ._
2
BUbberBUmP_S
_
_
_A
2_
Screws, I/420
x75
Shoulder BOt
13!81'sooketorstand_td
_
It will be necessary
tO brace or sepport
Unpacking
1.
Remove all packaging leaving
the air compressor on the pallet.
2.
Remove and discard the (4)
screws holding the air
compressor to the pellet.
one side of the air compressor
when installing the wheels because
the compressor will have a
tendency
to tip.
1.
Attach wheels with shoulder
bolts and nuts as shown,
2.
lighten securely. NOTE: The air
compressor
will sit level if the
wheels are propedy installed.
The wheels and
handle do not
provide adequate clearance,
stability or support for pulling the
unit up and down stairs or steps.
The unit must be lifted, or pushed
up a ramp.
It may be
necessary to brace
or support one side of the air
compressor when removing
the
pallet because
the air compressor
will have a tendency
to tip.
3.
Carefully remove the air
compressor from the pallet.
Assemble
Rubber Feet
1.
Attach rubber feet with the
screws provided as shown in
previous figure,
2.
lighten securely.
[327304
10- ENG
Advertisement
