Epson PowerLite 54c User Manual page 77

Depending on your computer's video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer's documentation or online help for details.
If you're using a PowerBook or iBook with
Macintosh OS X:
1. From the Apple menu, select
.
Display
2. Select
VGA Display
, then put a check mark in
Arrangement
If you're using a PowerBook or iBook with
Macintosh OS 9.x:
1. From the Apple menu, select
or
Monitors Monitors and Sound.
2. Click the
Arrange
3. Drag one monitor icon on top of the other. This lets you display
on the projector screen as well as the LCD screen.
4. If the icon isn't available, click the
Arrange
5. Select one of the listed
seconds for the projector to sync up after making the selection.)
The message
Not Supported
Make sure your computer's resolution doesn't exceed UXGA and
the frequency is supported by the projector. See page 88. If
necessary, change your computer's resolution setting as described
below.
Make sure the correct
menu. See page 50. It should normally be set to
System Preferences
or , click
Color LCD Arrange
Mirror Displays
Control Panels
icon.
resolutions. (Allow a few
Simulscan
is displayed.
is selected in the Image
Video Signal
, then click
or
.
, then click
icon.
Monitor
.
Auto
Solving Problems
77