Epson PowerLite 54c User Manual page 76

Solving Problems
76
Nothing appears on the external monitor.
Make sure the VGA computer cable is connected to your
computer's video port and the projector's
Computer1/Component Video1
connected the computer cable to the projector's
Computer2/Component Video2
Make sure the cable from your monitor is connected to the
projector's
Monitor Out
You see a blue screen with the message
Make sure the cables are connected correctly, as described in
Chapter 1.
Make sure the power to your computer or video source is turned
on.
If you've connected a computer and one or more video sources,
you may need to press the
the
Computer1/2
control) to select the correct source. Allow a few seconds for the
projector to sync up after pressing the button.
If you've connected a laptop computer, make sure it's set to
display on an external monitor. See page 31.
If you're using a PC laptop:
Hold down the
Fn
display on an external monitor. It may have an icon such as
, or it may be labelled
the projector to sync up after pressing it. Check your laptop's
manual or online help for details.
On most systems, the
between the LCD screen and the projector, or display on both at
the same time.
port. It will not work if you
port.
port.
No Signal
button (on the projector) or
Source
or button (on the remote
S-Video/Video
key and press the function key that lets you
. Allow a few seconds for
CRT/LCD
or
CRT/LCD
displayed.
key lets you toggle