Epson PowerLite 54c User Manual page 49

3. Use the directional buttons and press
following options:
Position
Press and hold one of the directional buttons to move the
image on the screen left, right, up, or down.
(computer images only)
Tracking
Removes unwanted vertical lines from a computer image by
matching the projector's internal clock to various computer
signals. See page 80 for more information about adjusting the
tracking.
(computer images only)
Sync
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
See page 80 for more information about adjusting the sync
setting.
Brightness
Lightens or darkens the overall image.
Contrast
Adjusts the difference between light and dark areas.
(video only)
Color
Adjusts the depth or intensity of the image.
(video only)
Tint
Adjusts the balance of green to magenta in the image.
Sharpness
Sharpens or softens the image.
Color Mode
Corrects the vividness of image color. You can select from the
following six settings, and save a different one for each
computer and/or video source:
For projecting movies in vivid color in bright
Dynamic:
rooms
Presentation:
Enter
For presentations in bright rooms
to select any of the
Fine-tuning the Projector
note
If you have repositioned the
image but then change your
mind, you can press the
button on the remote
Auto
control to restore the default
settings.
note
You can also select High
Brightness or Low Brightness
mode in the Advanced menu.
See page 54.
49