2. Connect the yellow RCA plug on the two-connector end of the
cable to the projector's yellow
3. Connect the other yellow plug to the video-out jack on your video
source.
4. To play sound through the projector, connect the black audio
plug on the RCA A/V cable to the projector's
5. Connect the red and white plugs on the other end of the cable to
the corresponding audio output jacks on your video source.
6. After you turn on your projector, be sure to:
If more than one device is connected to the projector, select
when you want to project this source. See page 30.
Video
Open the Audio menu and make sure
the
Audio Input
jack as shown below.
Video
Audio 2
setting. See page 51.
jack.
Audio2
is selected for
Setting Up the Projector
note
The Audio menu also lets
you adjust the volume.
23