Craftsman 113.213170 Owner's Manual page 4

b Drum sanders must NEVER be operated on
th=s drill press at a speed greater than 1800
RPM.
c. Do not=nstatlor use any drillthat exceeds 7"" _n
lengthor extends6" belowthechuckjaws They
can suddenlybend outward or break
d. Do not use w=rewheels, routerb=ts,shapercut-
ters, circle (fly)cutters or rotaryplaners on th=s
drill press.
11. Note and Follow the Safety Warnings and In-
structions that Appear on the Panel on the
Right Side of the Head:
t3. Think Safety. Safety _sa combination of operator
common sense and alertness at all times when me
dNII press ,s be0ng used
WARNING: Do not allow familiarity (gained from
frequent use of your drill press) to become com-
monplace. Always remember that a careless frac-
tion of a second is sufficient to inflict severe injury.
The operatJons of any power tool can result in toreign
ObleCts being thrown into the eyes, whnch can result in
severe eye damage Always wear safety goggles com-
ply with ANSI Z87.1 (shown on Package) before com-
mencing power tool operation. Safety Goggles are
available at Sears retanl or catalog stores.
•
IDANGER I
FOR YOUR OWN SAFETY:
Ull P.ec{M_'_lo_d Odll $114ed--- Eel Ch_l In.do I_ II_f Covet.
_JU _111 ! a_m te supOmt. I_1 tt_le _ _m IN_k_r
m _i_nec_or _ _ _eeL
12. This Drill Press has 16 speeds as listed below:
200 RPM 800 RPM
290 RPM 870 RPM
350 RPM 1440 RPM
430 RPM 1630 RPM
500 RPM 1820 RPM
580 RPM 2380 RPM
640 RPM 2540 RPM
720 RPM 3630 RPM
See inside of belt guard for specific placement o!
belt on pulleys.
WEAR YOUR
SA