Resetting The Lamp Timer; Storing The Projector; Transporting The Projector - Epson POWERLITE HOME 10+ CPD-1790-4R2 User Manual

Resetting the Lamp Timer

1. Press the
2. Highlight the
3. Select
Lamp Hours Reset
4. When you see a prompt asking whether you want to execute the command, highlight
and press the
5. When you're finished, press
The lamp usage timer doesn't register until you've used the lamp for at least 10 hours.

Storing the Projector

If you need to store the projector for awhile, do the following:
■
Make sure the temperature and humidity of the storage area are within the recommended
range for the projector (14 to 140 °F [-10 to 60 °C] and 10 to 90% relative humidity).
■
Attach the lens cover and retract the feet.
■
Remove the battery from the remote control.
■
Package the projector in its original packaging or equivalent (as described in the following
section).

Transporting the Projector

Note: Epson shall not be liable for any damages incurred during transportation.
The projector contains many glass and precision parts. If you need to transport it, follow these
guidelines to prevent damage:
■
When shipping the projector for repairs, use the original packaging material if possible. If
you do not have the original packaging, use equivalent materials, placing plenty of
cushioning around the projector. Be sure the carrier is capable of transporting fragile
equipment and is aware that the projector is fragile.
■
When you are hand-carrying the projector, use the recessed hand grips on the sides.
30
button on the projector or remote control.
Menu
menu and press the
Reset
.
button.
Select
Esc
button.
Select
or .
Menu
Yes