Table of Contents
Advertisement
6. Select the
■ Message
Turn this option off if you don't want to display the
of the input source or color mode. Warning messages are still displayed.
■ Background Color
Selects the screen color to display (blue or black) when you press the
A/V Mute
■ Startup Screen
Turn on this option to display the Epson logo whenever the projector starts.
7. Select the
■ Video Signal
Leave this set at
documentation for your video equipment specifies a setting.
■ Input A
Specifies the format for the video source connected to the Input A ports. Select either
Component
8. Select the
speakers connected to the projector's
9. Select the
menus.
Repositioning the Picture
Follow these steps to move the picture to a different position on the screen:
1. Press the
2. Press the down arrow button on the remote control or the
highlight the Setting menu. Then press
3. Select the
4. Use the arrow buttons on the remote control or the
projector to move the image left, right, up, or down.
5. When the image is positioned the way you want it, press the
22
On Screen Display
button on the remote control.
option to configure the input signal from your video equipment:
Input Signal
(composite or S-video signals only)
unless your input source is N-PAL format or the
Auto
(component and RGB video signals only)
or
RGB Video
option to adjust the volume of the projector's audio system or
Volume
option to choose the language you want to use for the projector
Language
button to display the menu screen.
Menu
option, then select the
Screen
option to make changes to these settings:
.
ports.
Audio
.
Select
option. You see a positioning screen.
Position
message or the name
No Signal
button on the projector to
,
,
or
buttons on the
button to exit.
Menu
Advertisement
Table of Contents
